Mitsubishi BA24 Wire EDM
Stock Number: 0447
Mitsubishi BA24
Age: 2012
Condition: As Is, Where Is
Mitsubishi BA24 with 16.5" Z Axis Wire EDM
The Mitsubishi BA24 is a large-capacity, wire EDM designed to accommodate a variety of machining needs, from parts to dies. The machine offers large X, Y, Z travel dimensions with a four-sided work table and all stainless steel work tank and fluid system. The BA24 maximizes cost efficiency, serviceability and compatibility.
Click to view larger photo
| Specification | Description |
|---|
| Machine Travels (XYZ) | 23.6" x 15.7" x 16.5" |
| Machine Travels (UV) | +- 3.0" |
| Table Dimensions | 34.6" x 26.8" |
| Max Workpiece Dimensions | 41.3" x 32.3" x 16.3" |
| Taper Dimensions | 15 deg @ 10.5" |
| Wide Angle Taper Dimensions | 45 deg @ 2.4" |
| Machine Resolution | 0.00001" |
| Table Rapid Speed | 51.2"/min |
| Wire Capabilities | 0.004" - 0.012" |
| Minimum Start Hole Diameter | 0.020" Dia |
| Max Wire Spool | 22lbs |
| Dielectric Capacity | 211 gal |
| Electrical Requirement | 200-220V/3Phz/13.5 kVA |
| Machine Dimensions | 106" x 111" x 96"H |
| Machine Weight | 9,116 lbs |
Equipped With:
* Mitsubishi PM4 64-bit CNC Control
* V350II High Speed Anti-Electrolysis Power Supply
* Automatic Wire Theader (AT2)
* Submerged Machining Capability
* Extended Z-Axis
* 40GB Hard Drive
* 4-Sided Zeroline Table
* Vertical Sliding Front Tank Door
* Stainless Steel Worktank
* Self-Cleaning Seal Plate
* Remote Hand Pendant
* Dielectric Filtration System
* Electric Chiller
* All Available Manuals and Accessories
RC Machinery Sales Company
PO Box 563
Hampshire, IL 60140
630-927-3247
rob@rcmachinerysales.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
